Whiteback
Bluebase
Redback2
Redband
PRESSURE SWITCHES - SERIES 5000
Low Pressure Diaphragm Gauge

Intended for use in hazardous areas where an intrinsically safe circuit cannot be used, These pressure switches can be used to monitor or control pressures within a fluid system by either closing or opening an electrical circuit.

They consist of a housing containing the pressure sensing mechanism with an external microswitch contained within an ATEX housing.

BMSwitch5000
BSIQualityLogo1

Maximum Pressure

To ensure long service life select the pressure range as follows:

Dynamic pressure applications Pmax = 75% of range.

Static pressure applications Pmax = 100% of range.

Maximum pressure that can be applied is 125% of pressure range.

 

Electrical Rating

5 amp at 250V 50 Hz. For other voltages and currents please consult our technical department.

 

Installation

These pressure switches can be mounted directly on the connecting thread. Sealing groves are machined onto the end face of parallel threads for use with sealing washers. A dedicated mounting bracket is available if required.

 

Technical Detail

Click on the image below for a PDF providing detailed specifications, variants and options.

ATEX approved to CE Ex II2 G (EEx.d.e IIC. T6)

enquiries@baileymackey.com  |  Tel +44 (0) 121 357 5351  |  Fax +44 (0) 121 357 8319  |  Baltimore Road, Birmingham, B42 1DE, UK